| Setting | Recommended |
|---|---|
| Orientation | Standing up (the STL is already exported upright) |
| Infill | 100% |
| Layer height | 0.12 – 0.16 mm |
| Material | White PLA |
| Thickness | 0.8 mm min, 3 mm max is a good start |
| Speed | Slow outer walls for a cleaner surface |
| Adhesion | A brim helps tall, thin flat lithophanes stay put |
Want to know what it costs to print? Use the 3D print cost calculator.
Lithophane turns dark areas into thick plastic and light areas into thin plastic. It looks like a plain white plate until you hold it up to a light, then the photo appears.
Relief does the opposite: bright areas stand out. Use it to turn a logo, drawing or sketch into a raised 3D model, a sign or a stamp. This is the mode most people want when they search for "image to STL".
No. The image is read and turned into a 3D model by your own browser. Nothing is sent to our server.
Most lithophanes use about 0.8 mm for the brightest areas and 3 mm for the darkest. Thicker models give more contrast but need a stronger light.
Every pixel becomes part of the mesh. Lower the Detail setting for a smaller file; Medium is sharp enough for most prints.
Yes. Choose Cylinder; the width becomes the distance around the lamp and the tool shows the diameter.
All of them, including Bambu Studio, PrusaSlicer, OrcaSlicer and Cura. You can also check it first in our free STL viewer.
Yes. Resin lithophanes come out very sharp; use white or clear-white resin and keep the minimum thickness at 0.8 mm or more.
